NE/PL-type Chain Conveyor Bucket Elevator
NE Chain Bucket Elevator
Introduction:
PL(NE)-type Chain Bucket Elevator manufactured by our factory is composed of the moving part (hopper and traction chain), the upper section with driving sprocket, the lower section with tension wheel, the intermediate housing, the driving device, and the reverse braking device and so on.
The hopper of this bucket elevator is discontinuous arrangement, which is used for loading by "drawing method" and unloading by "centrifugal feeding method".
The traction structure of the bucket elevator is two ring chains, so it is also chain drive bucket elevator or Chain Hoist.
manufacturing and installation methods:
According to different requirements, the chain bucket elevator has the following different manufacturing and installation methods:
1. According to the shape of hopper, it is divided into two types
S method -- with deep garden bottom hopper
Q method -- with shallow garden bottom hopper
2. There are two types of discharge ports in the upper section
X1 method -- discharge port with inclined flange
X2 method -- discharge port with horizontal flange
3. According to the lower section of the form of the feed port, it is divided into two
J1 method -- the inclined plane of the feed inlet forms a 45 Angle with the horizontal plane
J2 method -- the inclined plane of the feed inlet forms a 60 Angle with the horizontal plane
4. According to the position of the side inspection door in the middle housing, it is divided into four types
K1 method -- middle housing side with lower left inspection door
K2 method -- middle housing side with lower right inspection door
K3 process - middle housing side with upper left inspection door
K4 process - middle housing side with upper right inspection door
5. According to the position of the inspection door on the end face of the middle housing, it is divided into two types
Z1 method -- middle housing end face with bottom inspection door
Z2 method -- middle housing end face with upper inspection door
6. According to the transmission of the relative position of the elevator, it is divided into two
Left - the drive is on the left
Right - the drive is on the right
Technical Parameters:
|
Hoist Type |
PL-250 |
PL-350 |
PL-450 |
||||
|
|
Ψ=0.75 |
Ψ=1 |
Ψ=0.85 |
Ψ=1 |
Ψ=0.85 |
Ψ=1 |
|
|
Bucket Elevator Capacity（m³/h ) |
22.3 |
30 |
50 |
59 |
85 |
100 |
|
|
Hopper |
Capacity（L) |
3.3 |
10.2 |
22.4 |
|||
|
|
Bucket Pitch (Chain Pitch)（mm) |
200 |
250 |
320 |
|||
|
Hopper Chain Weight（kg/m ) |
36 |
64 |
92.5 |
||||
|
Chain Specification (Small Axle Diameter * Pitch * Allowable Tension) |
Φ20*200*1600 |
Φ20 * 250 *2500 |
Φ24 *320 * 2500 |
||||
|
Number Of Sprocket Teeth |
Transmission Sprocket |
8 |
6 |
6 |
|||
|
|
Tightening Sprocket |
6 |
6 |
6 |
|||
|
Hopper Speed（m/s) |
0.5 |
0.4 |
0.4 |
||||
|
Transmission Sprocket Shaft Rotation（r/min ) |
18.7 |
15.5 |
11.8 |
||||
|
Blockness Of General Materials（mm) |
55 |
80 |
110 |
||||
|
Maximum BlockSize (content not exceeding 10%) (mm) |
75 |
110 |
150 |
||||
Factory & Team
Delivery
√ Since our factory belongs to the machinery industry, the equipment needs to be matched with the process.
The size, model and specifications of the product can be customized according to customer needs.
√ All products in this store are for virtual quotes and are for reference only.
The actual quotation is subject to the technical parameters and special requirements given by the customer.
√ Provide product drawing, manufacturing process and other technical services.
1. Can you offer the customized solution to my case?
Our company has a professional R & D team, and be able to customize mechanical products for you according to your needs. At the same time, our company guarantees that every product produced for you is in compliance with the national and industry standard, and no quality problems.
Please send us inquiry if u have any concerns.
2. Is the machine produced safe and reliable?
Absolutely yes. We are a company specializing in the production of machinery. We have advanced technology, excellent R & D team, superb process design and other advantages. Please believe that we can fully meet your expectations. The machines produced are in line with national and industry quality standards. Please feel free to use.
3. What is the price of the product?
The price is determined by the specifications of the product, the material, and the special requirements of the customer.
Quotation method: EXW, FOB, CIF, ect.
Payment method: T/T, L/C, ect.
Our company is committed to selling high quality products that meet your requirements at an acceptable price.
4. Why do I trade with your company?
1. Reasonable price and exquisite workmanship.
2. Professional customization, good reputation.
3. Carefree after-sales service.
4. Provide product drawing, manufacturing process and other technical services.
5. Case experience of working with many outstanding domestic and foreign companies over the years.
Regardless of whether a deal is reached or not, we sincerely welcome your letter. Learn from each other and make progress together. Maybe we can be friends of the other side. 
5. Are you engineers available for overseas installation and training matters?
At the client’s request, Jinte can provide installation Technicians to supervise and assist in the assembly and commissioning of the equipment. And all the costs during the mission needs to be covered from you.
TEL: +86 18037396988
E-mail: jintejixie@yeah.net
