NE/PL-type Chain Conveyor Bucket Elevator
NE Chain Bucket Elevator
Introduktion:
PL(NE)-type Chain Bucket Hiss manufactured by our factory is composed of the moving part (hopper and traction chain), the upper section with driving sprocket, the lower section with tension wheel, the intermediate housing, the driving device, and the reverse braking device and so on.
The hopper of this bucket elevator is discontinuous arrangement, which is used for loading by "drawing method" and unloading by "centrifugal feeding method".
The traction structure of the bucket elevator is two ring chains, so it is also chain drive bucket elevator or Chain Hoist.
tillverknings- och installationsmetoder:
According to different requirements, the chain skop has the following different manufacturing and installation methods:
1. Enligt formen på tratten, är den uppdelad i två typer
S method -- with deep garden bottom hopper
Q method -- with shallow garden bottom hopper
2. Det finns två typer av utloppsportar i den övre delen
X1 method -- discharge port with inclined flange
X2 method -- discharge port with horizontal flange
3. According to the lower section of the form of the feed port, it is divided into two
J1 method -- the inclined plane of the feed inlet forms a 45 Angle with the horizontal plane
J2 method -- the inclined plane of the feed inlet forms a 60 Angle with the horizontal plane
4. Enligt den position av sidoinspektionsdörr i mitten huset, är den uppdelad i fyra typer
K1 method -- middle housing side with lower left inspection door
K2 method -- middle housing side with lower right inspection door
K3 process - middle housing side with upper left inspection door
K4 process - middle housing side with upper right inspection door
5. Enligt läget för inspektionsluckan på ändytan av det chassi, är den uppdelad i två typer
Z1 method -- middle housing end face with bottom inspection door
Z2 method -- middle housing end face with upper inspection door
6. According to the transmission of the relative position of the elevator, it is divided into two
Left - the drive is on the left
Right - the drive is on the right
Tekniska parametrar:
Hoist Typ |
PL-250 |
PL-350 |
PL-450 |
||||
|
Ψ = 0,75 |
Ψ = 1 |
Ψ = 0,85 |
Ψ = 1 |
Ψ = 0,85 |
Ψ = 1 |
|
Bucket Elevator Capacity(m³/h ) |
22,3 |
30 |
50 |
59 |
85 |
100 |
|
Ficka |
Kapacitet (L) |
3,3 |
10,2 |
22,4 |
|||
|
Bucket Pitch (Chain Pitch) (mm) |
200 |
250 |
320 |
|||
Hopper Chain Vikt (kg / m) |
36 |
64 |
92,5 |
||||
Kedja Specification (Small Axel Diameter * Pitch * Tillåten Tension) |
Φ20 * 200 * 1600 |
Φ20 * 250 * 2500 |
Φ24 * 320 * 2500 |
||||
Antal drevkuggar |
transmission Sprocket |
8 |
6 |
6 |
|||
|
Skärpning Sprocket |
6 |
6 |
6 |
|||
Hopper Hastighet (m / s) |
0,5 |
0,4 |
0,4 |
||||
Transmissions kedjehjulsaxel Rotation (r / min) |
18,7 |
15,5 |
11,8 |
||||
Blockness av General Materials (mm) |
55 |
80 |
110 |
||||
Maximal blockstorlek (viktinnehåll av högst 10%) (mm) |
75 |
110 |
150 |
Factory & Team
Delivery
√ Eftersom vår fabrik tillhör maskinindustrin, behöver den utrustning som skall matchas med processen.
Storleken, modell och specifikationer av produkten kan anpassas efter kundens behov.
√ Alla produkter i detta lager är för virtuella offerter och är endast för referens.
Själva citat är föremål för de tekniska parametrar och speciella krav som anges av kunden.
√ Tillhandahålla produkt ritning, tillverkningsprocessen och andra tekniska tjänster.
1. Can you offer the customized solution to my case?
Our company has a professional R & D team, and be able to customize mechanical products for you according to your needs. At the same time, our company guarantees that every product produced for you is in compliance with the national and industry standard, and no quality problems.
Skicka oss förfrågan om u har några frågor.
2. Är maskinen produceras säkra och tillförlitliga?
Absolutely yes. We are a company specializing in the production of machinery. We have advanced technology, excellent R & D team, superb process design and other advantages. Please believe that we can fully meet your expectations. The machines produced are in line with national and industry quality standards. Please feel free to use.
3. Vad är priset på produkten?
Priset bestäms av specifikationerna för produkten, materialet och de särskilda kraven för kunden.
Offert metod: EXW, FOB, CIF, ect.
Betalningssätt: T / T, L / C, ect.
Our company is committed to selling high quality products that meet your requirements at an acceptable price.
4. Varför handla med ditt företag?
1. Rimligt pris och utsökt hantverk.
2. Professional anpassning gott rykte.
3. Carefree kundservice.
4. Ge produkt ritning, tillverkningsprocessen och andra tekniska tjänster.
5. Case experience of working with many outstanding domestic and foreign companies over the years.
Oavsett om en uppgörelse har nåtts eller inte, vi välkomnar ditt brev. Lär av varandra och göra framsteg tillsammans. Vi kanske kan vara vänner på andra sidan.
5. Are you engineers available for overseas installation and training matters?
At the client’s request, Jinte can provide installation Technicians to supervise and assist in the assembly and commissioning of the equipment. And all the costs during the mission needs to be covered from you.
TEL: +86 18037396988
E-post: jintejixie@yeah.net