NE/PL-type Chain Conveyor Bucket Elevator
NE Chain Bucket Elevator
Fampidirana:
PL(NE)-type Chain Bucket ascenseur manufactured by our factory is composed of the moving part (hopper and traction chain), the upper section with driving sprocket, the lower section with tension wheel, the intermediate housing, the driving device, and the reverse braking device and so on.
The hopper of this bucket elevator is discontinuous arrangement, which is used for loading by "drawing method" and unloading by "centrifugal feeding method".
The traction structure of the bucket elevator is two ring chains, so it is also chain drive bucket elevator or Chain Hoist.
orinasa mpamokatra entana, sy ny fametrahana fomba:
According to different requirements, the chain siny ascenseur has the following different manufacturing and installation methods:
1. Araka ny endriky ny Hopper, dia zaraina ho roa karazana
S method -- with deep garden bottom hopper
Q method -- with shallow garden bottom hopper
2. Misy karazany roa ny marary mitsika seranana ao amin'ny fizarana ambony
X1 method -- discharge port with inclined flange
X2 method -- discharge port with horizontal flange
3. According to the lower section of the form of the feed port, it is divided into two
J1 method -- the inclined plane of the feed inlet forms a 45 Angle with the horizontal plane
J2 method -- the inclined plane of the feed inlet forms a 60 Angle with the horizontal plane
4. Araka ny toerana ny lafiny fisafoana varavarana eo afovoany trano, dia zaraina ho efatra karazana
K1 method -- middle housing side with lower left inspection door
K2 method -- middle housing side with lower right inspection door
K3 process - middle housing side with upper left inspection door
K4 process - middle housing side with upper right inspection door
5. Araka ny toerana misy ny fisafoana baravarana ny farany afovoany ambonin'ny trano, dia zaraina ho roa karazana
Z1 method -- middle housing end face with bottom inspection door
Z2 method -- middle housing end face with upper inspection door
6. According to the transmission of the relative position of the elevator, it is divided into two
Left - the drive is on the left
Right - the drive is on the right
Technical masontsivana:
Hoist Type |
PL-250 |
PL-350 |
PL-450 |
||||
|
Ψ = 0,75 |
Ψ = 1 |
Ψ = 0,85 |
Ψ = 1 |
Ψ = 0,85 |
Ψ = 1 |
|
Bucket Elevator Capacity(m³/h ) |
22.3 |
30 |
50 |
59 |
85 |
100 |
|
Hopper |
Fahafahana (L) |
3.3 |
10.2 |
22.4 |
|||
|
Bucket hitoby (Chain dity) (MG) |
200 |
250 |
320 |
|||
Hopper Chain Weight (kilao / m) |
36 |
64 |
92,5 |
||||
Rojo famaritana (Small Axle Diameter * hitoby * Allowable olana) |
Φ20 * 200 * 1600 |
Φ20 * 250 * 2500 |
Φ24 * 320 * 2500 |
||||
Isan'ny Sprocket Teeth |
Transmission Sprocket |
8 |
6 |
6 |
|||
|
hanenjanany Sprocket |
6 |
6 |
6 |
|||
Hopper Speed (m / s) |
0.5 |
0,4 |
0,4 |
||||
Transmission Sprocket Shaft fihodinan'ny (R / min) |
18.7 |
15.5 |
11.8 |
||||
Fitaovana Blockness Of General (MG) |
55 |
80 |
110 |
||||
Maximum BlockSize (News tsy mihoatra ny 10%) (MG) |
75 |
110 |
150 |
Factory & Team
Delivery
√ Koa satria ny orinasa an'ny orinasa ny milina, ny fitaovana mila mifanaraka amin'ny dingana.
Ny habeny, modely sy ny fepetra arahana ny vokatra azo namboarina araka ny zavatra ilain'ny mpanjifa.
√ rehetra fivarotana vokatra ity dia ho virtoaly nalaina ary ny boky ihany.
Ny teny nindramina no tena foto-kevitra ny masontsivana ara-teknika sy ny fepetra manokana nomena ny mpanjifa.
√ Omeo vokatra sary, orinasa mpamokatra entana, sy ny dingana ara-teknika ny asa.
1. Can you offer the customized solution to my case?
Our company has a professional R & D team, and be able to customize mechanical products for you according to your needs. At the same time, our company guarantees that every product produced for you is in compliance with the national and industry standard, and no quality problems.
Mba andefaso anay nanontany raha manana olana U.
2. Misy ny milina vokatra azo antoka sy azo antoka?
Absolutely yes. We are a company specializing in the production of machinery. We have advanced technology, excellent R & D team, superb process design and other advantages. Please believe that we can fully meet your expectations. The machines produced are in line with national and industry quality standards. Please feel free to use.
3. Inona no vidin'ny ny vokatra?
Ny vidiny dia tapa-kevitra ny fepetra arahana ny vokatra, ny ara-nofo, sy ny fepetra manokana ny mpanjifa.
Teny nindramina fomba: EXW, FOB, CIF, ect.
Fomba fandoavam-bola: T / T, L / C, ect.
Our company is committed to selling high quality products that meet your requirements at an acceptable price.
4. Nahoana aho no varotra amin'ny orinasa?
1. vidiny mirary sy tsara tarehy asa kanto.
2. Professional customization, tsara laza.
3. mivaky loha-varotra taorian'ny fanompoana.
4. Manome vokatra sary, orinasa mpamokatra entana, sy ny dingana ara-teknika ny asa.
5. Case experience of working with many outstanding domestic and foreign companies over the years.
Na inona na inona raha mba misy fifanarahana dia tonga na tsia, dia tena handray ny taratasy. Mianara avy amin'ny tsirairay ary handroso miaraka. Angamba afaka ny ho namana isika amin'ny lafiny iray koa.
5. Are you engineers available for overseas installation and training matters?
At the client’s request, Jinte can provide installation Technicians to supervise and assist in the assembly and commissioning of the equipment. And all the costs during the mission needs to be covered from you.
TEL: +86 18037396988
E-mail: jintejixie@yeah.net