Dewatering Screen (Vibrating Dewatering Screen)

A dewatering screen is a screening machine that separates solids from liquids using linear or high-frequency vibration. It is widely used in sand and aggregate washing, coal slime recovery at coal preparation plants, and dry stacking of mine tailings. It is also known as a sand dewatering screen, coal slime dewatering screen, or tailings dewatering screen.

Working principle: four steps to dewatering

1. Feeding – Slurry/mud is fed continuously onto the screen surface from the feed end. The feed end is tilted upward to form a slurry pool, and the static head helps the liquid pass through the screen.
2. Vibrating and conveying – Two motors rotate in opposite directions in self-synchronization; the centrifugal forces of the eccentric masses combine along the vibration direction, driving the screen box in a reciprocating linear motion. The material is thrown up and moves forward in a jumping motion.
3. Dewatering through the screen – The filter layer on the screen retains fine particles and squeezes out water; water passes through the screen apertures (polyurethane screen mesh) under vibration, significantly reducing the moisture content.
4. Discharge – The dewatered material exits from the discharge end (optionally with a fine sand recovery unit), while the drained water is collected and recycled.

Main structure (schematic)

Screen box (lined with wear-resistant polyurethane mesh) – exciter (dual vibration motors) – screen mesh – damping springs – frame/base – feed and discharge chutes. The exciter is typically mounted above the center of gravity of the screen box; the screen surface combines arc and straight sections.

Main types: Linear motion dewatering screen vs. High-frequency dewatering screen

• Linear motion dewatering screen (most common): two self-synchronizing motors, linear vibration trajectory, adjustable amplitude (eccentric blocks), high throughput; suitable for medium-to-coarse materials such as sand, coal, and ore; usually paired with sand washers and fine sand recovery units.
• High-frequency dewatering screen: high frequency, low amplitude (up to ~3,600 rpm); the high-frequency vibration breaks the surface tension of water on the material, achieving faster and drier dewatering; ideal for fine particles (e.g., below 0.3 mm); the screen surface resists clogging and is suited to tailings dry stacking.
• Commonly used together: arc screens (pre-dewatering before the main screen), hydrocyclones (feed concentration), and fine sand recovery units.

Typical applications

• Sand & aggregate / manufactured sand – dewatering washed sand so the finished product meets moisture specs
• Coal preparation plants – coal slime recovery, de-sliming and de-medium
• Mineral processing – tailings dry stacking, concentrate dewatering, reducing tailings pond pressure
• Environmental / building materials – solid-liquid separation pretreatment for sludge and stone-powder slurry

Selection considerations

1. Material characteristics – particle size, mud content, clogging tendency: fine material → high-frequency type; medium/coarse → linear type.
2. Throughput – select screen area and model by t/h, and match the feed particle size requirement.
3. Target moisture – the drier the product required, the more attention to amplitude/frequency and screen open area.
4. Screen mesh material and aperture – wear-resistant polyurethane mesh is common; choose aperture by separation size (e.g., 0.3–0.5 mm).

Note: the structure above is schematic; specific model parameters (screen dimensions, double amplitude, motor power, etc.) vary by manufacturer and model — refer to the manufacturer’s datasheet for selection.

√  Since our factory belongs to the machinery industry, the equipment needs to be matched with the process.

The size, model and specifications of the product can be customized according to customer needs.

√  All products in this store are for virtual quotes and are for reference only.

The actual quotation is subject to the technical parameters and special requirements given by the customer.

√  Provide product drawing, manufacturing process and other technical services.

1. Can you offer the customized solution to my case?

Our company has a professional R & D team, and be able to customize mechanical products for you according to your needs. At the same time, our company guarantees that every product produced for you is in compliance with the national and industry standard, and no quality problems.

Please send us inquiry if u have any concerns.

2. Is the machine produced safe and reliable?

Absolutely yes. We are a company specializing in the production of machinery. We have advanced technology, excellent R & D team, superb process design and other advantages. Please believe that we can fully meet your expectations. The machines produced are in line with national and industry quality standards. Please feel free to use.

3. What is the price of the product?

The price is determined by the specifications of the product, the material, and the special requirements of the customer.

Quotation method: EXW, FOB, CIF, ect.

Payment method: T/T, L/C, ect.

Our company is committed to selling high quality products that meet your requirements at an acceptable price.

4. Why do I trade with your company?

1. Reasonable price and exquisite workmanship.

2. Professional customization, good reputation.

3. Carefree after-sales service.

4. Provide product drawing, manufacturing process and other technical services.

5. Case experience of working with many outstanding domestic and foreign companies over the years.

Regardless of whether a deal is reached or not, we sincerely welcome your letter. Learn from each other and make progress together. Maybe we can be friends of the other side.

5. Are you engineers available for overseas installation and training matters?

At the client’s request, Jinte can provide installation Technicians to supervise and assist in the assembly and commissioning of the equipment. And all the costs during the mission needs to be covered from you.

TEL: +86 15737355722

E-mail:  jinte2018@126.com