1. Definition

A roller screen (also called roll grizzly / shaft screen) is a screening machine made of multiple parallel rotating shafts fitted with discs or toothed discs. Material fed onto the slightly inclined roller deck is conveyed forward by shaft rotation and gravity: particles smaller than the gaps between rollers fall through as undersize, while larger particles keep moving along the deck and discharge at the end as oversize — screening and conveying happen simultaneously.

2. Structure & Working Principle

Main structure: frame (screen casing), multiple roller shafts, discs/toothed discs, drive unit (motor + reducer, with chain or gear transmission), feed inlet, undersize outlet, oversize outlet.

Working flow: Feeding → Conveying on rollers → Fines passing through → Oversize discharging

• Feeding: material is evenly fed from the inlet onto the inclined roller deck;
• Conveying: all shafts rotate in the same direction; material moves toward the discharge end by roller friction and the deck slope;
• Passing through: fines drop between the rollers into the undersize hopper below while moving along;
• Discharging: coarse lumps roll along the deck and leave through the oversize outlet at the end.

3. Classification

By roller face:

• Disc type: plain discs on the shafts, uniform gaps; for general size classification;
• Toothed-disc type: toothed discs on the shafts; better at breaking arches and handling wet, sticky materials.

By drive:

• Centralized drive: one motor drives all shafts through chains/gears;
• Grouped drive: multiple motors drive the shaft groups separately.

By installation: stationary (most common); mobile (for temporary or relocatable duty).

4. Key Technical Parameters (typical ranges)

表格

Note: typical ranges (schematic); refer to the specific model and manufacturer’s data.

5. Advantages & Limitations

Advantages:

• High throughput, ideal for large-flow bulk pre-screening;
• Resistant to blinding — handles wet, sticky, mud-containing materials well;
• Smooth operation, low noise, less dust;
• Screening and conveying in one unit; compact and easy to integrate into a system.

Limitations:

• More complex structure and higher cost;
• Gap size is fixed; changing the cut point requires replacing discs;
• Rollers (discs/toothed discs) wear relatively fast; more maintenance;
• Limited separation accuracy — not for fine classification;
• Efficiency drops for very fine material (e.g., below ~10 mm).

6. Typical Applications

Coal handling systems of thermal power plants (raw coal, coal gangue pre-screening), coal preparation plants, coking plants (coke screening), metallurgy (sinter, pellets), building materials (limestone), and mines (ore pre-screening) — large-particle, large-flow bulk screening duties.

7. Common Faults & Maintenance