During the normal operation of the vibrating screen, due to the different characteristics and shapes of the materials, different types of screen holes will be blocked. The reasons for the blockage are as follows:
1.Contains a large number of particles close to the separation point;
2.The material has a high water content;
3.Spherical particles or materials with multiple contact points to the sieve holes;
4.Static electricity will occur;
5.Materials have fibrous materials;
6.There are more flaky particles;
7.The woven screen mesh is thick;
8. Thicker screens such as rubber screens have unreasonable hole designs and do not reach the upper and lower sizes, which can cause particles to become stuck. Because most of the material particles that need to be screened are irregular, the causes of blockage are also various.