1. Rarraba radial ɗin bearing ɗin ya yi ƙanƙanta sosai:

Saboda bearing da ake amfani da shi a cikin allon girgiza yana da babban kaya da kuma mita mai yawa, kuma nauyin yana canzawa koyaushe, idan bearing ɗin ya yi ƙanƙanta, zai haifar da matsalolin dumama kuma yana shafar amfani na yau da kullun.

Don wannan matsala, za mu iya zaɓar bearings masu manyan clearances. Idan ana amfani da bearings na yau da kullun, ana buƙatar a sa zoben waje don cimma babban clearance.

2. Man shafawa mai ɗauke da ƙaiƙayi ba shi da kyau:

Asarar mai mai shafawa a cikin mai ko kuma ƙazanta a cikin mai mai shafawa na iya sa bearing ɗin ya yi aiki mara kyau kuma ya haifar da zafi.

Don wannan matsala, ya zama dole a riƙa duba man shafawa na mai ɗaukar man akai-akai. Idan aka gano cewa akwai ƙarancin man shafawa ko ƙazanta a cikin man shafawa, ya zama dole a ƙara ko a tsaftace mai ɗaukar man.

3. An matse murfin ɗaukar kaya sosai:

Dole ne gland da zoben bearing su kasance suna da wani yanki na sarari. Idan matsin ya yi tsauri sosai, zubar da zafi da watsawar axial ba za su yi kyau ba wanda zai haifar da samar da zafi.

Don wannan matsala, ana iya daidaita gasket ɗin da ke tsakanin gland da gidan. A gefe guda kuma, dalilin samar da zafi shine inganci da lalacewar bearing ɗin.

Idan kuna da wata tambaya, don Allah kada ku yi jinkirin tuntuɓar mu. Ga shafin yanar gizon mu na aure:https://www.hnjinte.com